826 - Cant close or shutdown 826-824 823 is ok.

Bugs and issues - current donor version.
Post Reply
Message
Author
minsik
Posts: 17
Joined: 13.05.2015, 10:12
Location: Sydney - Australia

826 - Cant close or shutdown 826-824 823 is ok.

#1 Post by minsik » 06.08.2020, 02:05

826-824 cant shutdown or close or alt+F4 program. Button lightsup with mouse over but nothing happens when clicked.
File, exit nothinbg happens.
Only way is to crash it down by task manager. Then it records a crashdump.
Windows 10 64bit 2004 and latest updates etc level.
Freecommander Donor installed 64bit version.

tried Freecommander portable version 826 which loads and shutsdown ok. I hope this info helps.

Karol
Posts: 775
Joined: 19.08.2007, 10:05

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#2 Post by Karol » 06.08.2020, 06:34

Check the Settings for "Handle closing as minimization".

minsik
Posts: 17
Joined: 13.05.2015, 10:12
Location: Sydney - Australia

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#3 Post by minsik » 06.08.2020, 09:20

thanks but no change. Tried all combinations and minimise wont minimise either. close lights up when clicked but nothing happens. Show confirmation on shutdown if set never shows when trying to close.
Very strange. Removed all loaded and running other programs.

Not sure of this is related but opening program it loads and then sits there not opening any previous folders. I have set layouts so then using alt+1 or alt+2 loads the set of folders instantly. Is this a clue?

horst.epp
Posts: 175
Joined: 15.11.2008, 19:18

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#4 Post by horst.epp » 06.08.2020, 11:33

At least here there is no such problem with the actual FC x64 version 826.
Also this would be reported by many users so I guess there is same strange software on your PC.
Windows 10 Home x64 Version 2004 (OS Build 19042.608)
Total Commander 9.51 x64 / x86, Everything 1.4.1.996 (x64)
FreeCommander XE 2020 Build 831 64-bit donor

minsik
Posts: 17
Joined: 13.05.2015, 10:12
Location: Sydney - Australia

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#5 Post by minsik » 06.08.2020, 13:02

thanks for the assurance its good elsewhere. Will have to remove and clean then reinstall try.
appreciate the help and ideas.

Gekko
Posts: 8
Joined: 05.01.2014, 22:08

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#6 Post by Gekko » 07.08.2020, 00:55

I have experienced the same with: FreeCommander XE 2020 Build 825 & 826 64-bit donor, on Windows 10 64-bit Version 2004 (OS Build 19041.423)

On every start-up, FreeCommander XE 2020 Build 825 & 826 64-bit donor will open with the top panel collapsed, contents of the active tab are not listed, the program will not close with 'File/Exit', 'Alt+F4', 'X' at top right of the window; must kill the process to close the program.
'Restore Settings' fixes things until the next startup, then all repeats.

However this behavior only appears when the program is started from a shortcut that has "Properties/Shortcut/Run: Maximized". It runs normally when started from a shortcut that has "Properties/Shortcut/Run: Normal window"

I hope this information is helpful.

-Gekko (Larry)

Marek
Author
Author
Posts: 2875
Joined: 10.04.2006, 07:48
Location: Germany
Contact:

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#7 Post by Marek » 07.08.2020, 05:48

However this behavior only appears when the program is started from a shortcut that has "Properties/Shortcut/Run: Maximized". It runs normally when started from a shortcut that has "Properties/Shortcut/Run: Normal window"
Thanks! It is reproducible.

User avatar
bege
Posts: 54
Joined: 14.09.2010, 00:23
Location: Germany

Re: 826 - Cant close or shutdown 826-824 823 is ok.

#8 Post by bege » 14.08.2020, 15:23

Marek wrote:
07.08.2020, 05:48
However this behavior only appears when the program is started from a shortcut that has "Properties/Shortcut/Run: Maximized". It runs normally when started from a shortcut that has "Properties/Shortcut/Run: Normal window"
Thanks! It is reproducible.
Can this be fixed?

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 11 guests