Quick filter stays when switching tabs

Bugs and issues.
Post Reply
Message
Author
antekgla
Posts: 9
Joined: 24.09.2016, 17:10

Quick filter stays when switching tabs

#1 Post by antekgla » 08.10.2022, 22:36

Single panel setup.

I apply a Quick Filter (Ctrl+Y) in a tab.
When I change to another tab the filter applied in the previous tab is ALSO applied to the other tab.
If I cycle to all open tabs the filter still is active in ALL TABS.

This behaviour is on purpose?
In the 770 release when you apply a filter to a tab, if you change to another tab the filter is clear. When you return to the original tab the filter is applied.
In the 840 release behaviour is the same of 861.

To my, the desired behavior would be the 770 or at least should be a option to the user to choose.

The option "Keep Filter on Change Tab" don't seems to make any difference, but I think what the purpuse of that option is another.

My setup: FreeCommander 32-bit Public 861 release. Windows 10 64 bits

horst.epp
Posts: 460
Joined: 15.11.2008, 20:18

Re: Quick filter stays when switching tabs

#2 Post by horst.epp » 09.10.2022, 11:43

Confirmed, there is a problem.
Unselecting "Keep filter on tab change" isn't working.
The filter is still applied to any other tab whatever they have as path.
Windows 11 Home x64 Version 23H2 (OS Build 22631.3296)
Everything Version 1.5.0.1371a (x64), Everything Toolbar 1.3.2, Listary Pro 6.3.0.67
FreeCommander XE 2024 Build 905 64-bit donor

Marek
Author
Author
Posts: 3974
Joined: 10.04.2006, 09:48
Location: Germany
Contact:

Re: Quick filter stays when switching tabs

#3 Post by Marek » 09.10.2022, 22:10

I can not reproduce it with default settings.
Have you checked default settings too?

horst.epp
Posts: 460
Joined: 15.11.2008, 20:18

Re: Quick filter stays when switching tabs

#4 Post by horst.epp » 10.10.2022, 09:22

I tested it with default settings but its still applying the filter across tabs.
It only works as expected if I switch off "Keep filter on folder change"
but this is not usefull at all.
Windows 11 Home x64 Version 23H2 (OS Build 22631.3296)
Everything Version 1.5.0.1371a (x64), Everything Toolbar 1.3.2, Listary Pro 6.3.0.67
FreeCommander XE 2024 Build 905 64-bit donor

Marek
Author
Author
Posts: 3974
Joined: 10.04.2006, 09:48
Location: Germany
Contact:

Re: Quick filter stays when switching tabs

#5 Post by Marek » 10.10.2022, 20:55

How I check it:
1. Unpack portable zip version in any folder (I have checked current 875 and 861)
2. Start FC
3. On the left site select c:\Windows (first tab)
4. Add new tab on the left site (Ctrl+T)
5. Change the path to c:\Windows\System32
6. Now on the left site we have two tabs with different paths
7. Select first tab and then type txt in quick filter field
8. Filter is applied to the first tab
9. Switch to the second tab -> filter is not applied
10. Switch back to the first tab -> filter is applied ( due to default setting "Keep filter on tab change" )
For me it is properly.

Keep filter on tab change
If this setting is checked, the set quick filter is used again, if after a change to another tab, the initial tab is reactivated.

User avatar
Dreamer
Site Admin
Posts: 6113
Joined: 19.08.2007, 23:40

Re: Quick filter stays when switching tabs

#6 Post by Dreamer » 10.10.2022, 21:02

I can't reproduce it either, in 861 and 875.

Perhaps more exact steps would help, which panel is used, which way to activate quick filter, changing tab, mouse, keyboard?

antekgla
Posts: 9
Joined: 24.09.2016, 17:10

Re: Quick filter stays when switching tabs

#7 Post by antekgla » 10.10.2022, 21:32

Marek wrote: 10.10.2022, 20:55 How I check it:
1. Unpack portable zip version in any folder (I have checked current 875 and 861)
2. Start FC
3. On the left site select c:\Windows (first tab)
4. Add new tab on the left site (Ctrl+T)
5. Change the path to c:\Windows\System32
6. Now on the left site we have two tabs with different paths
7. Select first tab and then type txt in quick filter field
8. Filter is applied to the first tab
9. Switch to the second tab -> filter is not applied
10. Switch back to the first tab -> filter is applied ( due to default setting "Keep filter on tab change" )
For me it is properly.

Keep filter on tab change
If this setting is checked, the set quick filter is used again, if after a change to another tab, the initial tab is reactivated.
I do this and works OK. Like you say.

But in my usual install (portable) works as described in first post.
I'm using Freecommander from several years now... Always portable, replacing the .exe with new release.
So my .ini would contain values used for old versions not used anymore.

That could be the cause????

I know what the solution would be delete my .ini and start over... but I configured my FreeCommander with a lot of things and I don't want lose them if it is possible.

User avatar
Dreamer
Site Admin
Posts: 6113
Joined: 19.08.2007, 23:40

Re: Quick filter stays when switching tabs

#8 Post by Dreamer » 10.10.2022, 21:45

Some other files are different too, so first try to replace all files from the portable folder - zip file.

You could also send the freecommander.ini file to Marek via email, here.

antekgla
Posts: 9
Joined: 24.09.2016, 17:10

Re: Quick filter stays when switching tabs

#9 Post by antekgla » 10.10.2022, 21:53

Sorry for the double post...

I discover the culprit...
Was the

Code: Select all

QuickFilterOffWithFolderChange=1
I was 0 in my setup.
Turning it to 1 do the trick.

That uncheck the option Keep Filter in Folder Change
I thinked what that option was to mantain the filter if you change the folder IN THE SAME TAB but looks like it affects the behaviour between tabs.

PD: I uncheck Keep Filter in Folder Change in the fresh install and repeat the behavior of filter in all Tabs. So it seems like a bug.

funkist
Posts: 18
Joined: 23.09.2013, 14:41

Re: Quick filter stays when switching tabs

#10 Post by funkist » 05.06.2023, 12:01

I use a setup with just one detail pane but many tabs (similar to the new File Explorer in Windows 11).

In order NOT to keep the Quickfilter on when changing between tabs (with Alt+Tab), I had to deselect both settings here:
  • Keep filter on for folder change
  • Keep filter on tab change
But then the QuickFilter does not switch back on when I circle back to the tab where it was enabled. This may be intended.

User avatar
Dreamer
Site Admin
Posts: 6113
Joined: 19.08.2007, 23:40

Re: Quick filter stays when switching tabs

#11 Post by Dreamer » 05.06.2023, 19:56

If you disable "Keep filter on for folder change", it's not as you want it? This way it will be enable at tab where you enable it, but it will be disabled at other tabs.

Post Reply

Who is online

Users browsing this forum: Amazon [Bot] and 23 guests