Refreshing does not happen automatically anymore
Refreshing does not happen automatically anymore
My FC suffers from lack of auto-refreshing for actions done outside of FreeCommander- e.g. if I delete something in any other program, the items are not removed from a Tab they "are" currently shown thus I have to somehow evoke refreshing manually [like going up one level and going back or just pressing CTRL + R
I do not know if this is caused by using 64-bit version, 64-bit portable or just portable - but when I was using 32-bit installed I had no such issue; on the contrary: when I went from x86 to x64 most of my issues with FC have disappeared
I have waited for weeks now, getting acquainted with 64-bit version and hoping for a fix with some update, but enough is enough. And I did went to
Tools > Settings > View > Files/folder list > Refresh
de-selected everything, closed FC, re-opened it and selected back everything with the exception of "Ignore..." as I had not been using it. But still my FC works in the same ill manner, i.e. not reacting automatically to changes occurring due to actions performed elsewhere
I do not know if this is caused by using 64-bit version, 64-bit portable or just portable - but when I was using 32-bit installed I had no such issue; on the contrary: when I went from x86 to x64 most of my issues with FC have disappeared
I have waited for weeks now, getting acquainted with 64-bit version and hoping for a fix with some update, but enough is enough. And I did went to
Tools > Settings > View > Files/folder list > Refresh
de-selected everything, closed FC, re-opened it and selected back everything with the exception of "Ignore..." as I had not been using it. But still my FC works in the same ill manner, i.e. not reacting automatically to changes occurring due to actions performed elsewhere
Last edited by Forez on 26.05.2023, 19:52, edited 3 times in total.
Re: Refreshing does not happen automatically anymore
Auto Refresh works fine here with
FreeCommander XE 2023 Build 889 64-bit donor
FreeCommander XE 2023 Build 889 64-bit donor
Windows 11 Home x64 Version 23H2 (OS Build 22631.3447)
Everything Version 1.5.0.1372a (x64), Everything Toolbar 1.3.3, Listary Pro 6.3.0.73
FreeCommander XE 2024 Build 906 64-bit donor
Everything Version 1.5.0.1372a (x64), Everything Toolbar 1.3.3, Listary Pro 6.3.0.73
FreeCommander XE 2024 Build 906 64-bit donor
Re: Refreshing does not happen automatically anymore
This problem of mine looks like another manifestation of that bug concerning ICO files [https://freecommander.com/forum/viewtopic.php?t=12838] - but on the other hand this one concerning refreshing of everything happens only in 64-bit version, while that previous one concerning just icons in all kinds of versions
Currently I am using Build 891 64-bit Donor Portable
Currently I am using Build 891 64-bit Donor Portable
Last edited by Forez on 20.07.2023, 10:19, edited 1 time in total.
Re: Refreshing does not happen automatically anymore
Can you reproduce it if you make changes with Windows Explorer?Tools > Settings > View > Files/folder list > Refresh
de-selected everything, closed FC, re-opened it and selected back everything with the exception of "Ignore..." as I had not been using it. But still my FC works in the same ill manner, i.e. not reacting automatically to changes occurring due to actions performed elsewhere
If that is reproducible, then try first with only first two refresh options.
Re: Refreshing does not happen automatically anymore
I am beginning to suspect that
Because I can more easily [i.e. more often] experience FreeCommander not refreshing after e.g. I execute in it CTRL+C and then [within the same folder] CTRL+V on a file. Like now when I can do it in also in Windows Explorer and see a copy of file in it but not in FC [until I refresh it]. And what is interesting, this seems to happens only with files but not with folders
All in all, with enough work done, my FreeCommander becomes unreliable due to lack of auto-refreshing
is a one of stages of the bug - or a separate one
Because I can more easily [i.e. more often] experience FreeCommander not refreshing after e.g. I execute in it CTRL+C and then [within the same folder] CTRL+V on a file. Like now when I can do it in also in Windows Explorer and see a copy of file in it but not in FC [until I refresh it]. And what is interesting, this seems to happens only with files but not with folders
All in all, with enough work done, my FreeCommander becomes unreliable due to lack of auto-refreshing
Last edited by Forez on 10.07.2023, 12:23, edited 2 times in total.
Re: Refreshing does not happen automatically anymore
Could you try the default settings with the portable ZIP version http://freecommander.com/en/faq-freecom ... l-portable
Re: Refreshing does not happen automatically anymore
Apparently my Build 891 64-bit Donor Portable when run with default settings has no problem in detecting a deletion or creation of copy of files and folders in Windows Explorer
Re: Refreshing does not happen automatically anymore
Which paths are you using? Local drive, network, file container, FTP?
I can reproduce refresh problems with 891 64-bit portable and 880 32-bit portable, with the file container:
To reproduce:
- use default settings
- open FC 891 and FC 880 in window mode, so that both are fully visible on desktop
- in both instances create the SAME file container in the left panel
- in both instances create the same test folder A on local disk and enter this folder
- now create the test folder X in 891
= it's correctly shown in 880
- copy the folder X to file container in 891
= folder X is NOT shown in 880
Another one from this topic:
https://freecommander.com/forum/viewtopic.php?t=11185
- use default settings
- drag&drop file from file container to recycle bin in the splitter (confirmation dialog for delete operation in Windows should be disabled)
= file is not removed from file container
This one is strange, still can reproduce it first time, but after that, when I do the same step for another file, it works good.
FC 891 donor 64-bit portable and 880 32-bit public portable, Windows 10 22H2 64-bit.
More refresh issues reported here (I updated the topic for the latest version):
Auto refresh issues (updated 4x) - FreeCommander Forum
I can reproduce refresh problems with 891 64-bit portable and 880 32-bit portable, with the file container:
To reproduce:
- use default settings
- open FC 891 and FC 880 in window mode, so that both are fully visible on desktop
- in both instances create the SAME file container in the left panel
- in both instances create the same test folder A on local disk and enter this folder
- now create the test folder X in 891
= it's correctly shown in 880
- copy the folder X to file container in 891
= folder X is NOT shown in 880
Another one from this topic:
https://freecommander.com/forum/viewtopic.php?t=11185
- use default settings
- drag&drop file from file container to recycle bin in the splitter (confirmation dialog for delete operation in Windows should be disabled)
= file is not removed from file container
This one is strange, still can reproduce it first time, but after that, when I do the same step for another file, it works good.
FC 891 donor 64-bit portable and 880 32-bit public portable, Windows 10 22H2 64-bit.
More refresh issues reported here (I updated the topic for the latest version):
Auto refresh issues (updated 4x) - FreeCommander Forum
Re: Refreshing does not happen automatically anymore
Ordinary folders on ordinary volumes formatted to NTFS, with cache and trim turned on for them and indexing turned off
I still cannot pin point the triggers other than a vague "somewhat a lot of operations". And I was unable to check if File Containers are then also affected by it when it occurs. And that is because it seems that I will have to stop whatever I will happen to be doing when it maifests itself again, as apparently some actions can make it go away - thus I will be able to indulge myself with this issue only when I will not be doing anything of importance and / or in a hurry
Re: Refreshing does not happen automatically anymore
Some other volume related issues with refreshing: https://freecommander.com/forum/viewtop ... 594#p41594
Re: Refreshing does not happen automatically anymore
Would symptoms like me having to use always
Task Manager > Details > View > Refresh now
and sometimes
Control Panel > All Control Panel Items > Programs and Features > View > Refresh
in order to see the current state of affairs point out to something inherently wrong being with my Windows 10 Enterprise 20H2 x64 - which ill-working would [only sometimes] manifests itself in FreeCommander?
Task Manager > Details > View > Refresh now
and sometimes
Control Panel > All Control Panel Items > Programs and Features > View > Refresh
in order to see the current state of affairs point out to something inherently wrong being with my Windows 10 Enterprise 20H2 x64 - which ill-working would [only sometimes] manifests itself in FreeCommander?
Re: Refreshing does not happen automatically anymore
Well, does anyone have any thoughts on that last piece of info?
Who is online
Users browsing this forum: Ahrefs [Bot] and 58 guests