FC 827-64 bit-Splitter bar - Copy and Move icons
FC 827-64 bit-Splitter bar - Copy and Move icons
It used to be that the Copy and Move icons had a horizontal blue and red arrow respectively, and would point right or left to the target pane (folder etc.) for this operation. I can no longer see these, and have been through setting up the splitter to try to get them back. I can't see them anywhere.
I'd welcome some advice on what's happening or what to do.
I'd welcome some advice on what's happening or what to do.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
There are several different copy/move operations that can be selected under the Define action toolbars window:
1. FC-Copy / FC-Move. The icon for these operations do not have the horizontal arrows in either the settings window icon nor the splitter icon
2. Copy / Move. The icon for these operations do not have the horizontal arrows in the settings window icon, but they do in the splitter icon
3. Copy with dialog / Move with dialog. Same as above, no arrow in the settings icon, but there is one in the splitter icon
So if you want the horizontal arrows select either the Copy / Move or the Copy / Move with dialog.
I hope that helps.
1. FC-Copy / FC-Move. The icon for these operations do not have the horizontal arrows in either the settings window icon nor the splitter icon
2. Copy / Move. The icon for these operations do not have the horizontal arrows in the settings window icon, but they do in the splitter icon
3. Copy with dialog / Move with dialog. Same as above, no arrow in the settings icon, but there is one in the splitter icon
So if you want the horizontal arrows select either the Copy / Move or the Copy / Move with dialog.
I hope that helps.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
Thanks for reply. I think I understand what you've said, but I'm still not able to sort this out correctly.
I have run through this completely, and have a series of screen shots to show exactly what I mean. However, there doesn't seem to be any method of posting them directly here.
I have run through this completely, and have a series of screen shots to show exactly what I mean. However, there doesn't seem to be any method of posting them directly here.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
To insert an image the image has to be on a server someplace, i.e., imgur or onedrive, etc.
Are these the icons you're looking for
Are these the icons you're looking for
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
If you mean the buttons on the splitter.
Right Click on your toolbar->Define Action Toolbar->Window Define action Toolbar appears
There should be on the left side different toolbars with check boxes. Put a mark into the
Splitter option and then the buttons on the splitter should be there of confirming your change with OK.
Link of the option
https://freecommander.com/fchelpxe/en/D ... lbars.html
Update added link an picture.
Right Click on your toolbar->Define Action Toolbar->Window Define action Toolbar appears
There should be on the left side different toolbars with check boxes. Put a mark into the
Splitter option and then the buttons on the splitter should be there of confirming your change with OK.
Link of the option
https://freecommander.com/fchelpxe/en/D ... lbars.html
Update added link an picture.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
Those are the ones. The arrow on each used to switch direction depending on source and target panes (unless I imagined it for x years!). When I go to set up Splitter bar buttons (as per @Ticros's screenshot), I do not see either of those. I have looked at every possible Copy/Move "mode" (FC/Win/w/w-out Dialogue) button, but do not see them. At the moment, I have a good selection of 2-pane green Plus (copy) buttons, and "ghost"+solid pane with downpointing red Arrow (move).
I can of course get along well enough with that button set, but, having used FC for many years and got used to the arrow buttons you show, I'm at a loss to understand why they are not available in my setup.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
Try the option "use big icons", if not already set.
When you do not set this, the symbols will not have the arrows.
When you do not set this, the symbols will not have the arrows.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
Thanks. I've got it set to "big icons", and switching between "big" and "not big" makes no difference.
I got rid of my photo-sharing facilities when Photobucket changed, but I'll see if I can resurrect something that will enable me to post some screenshot links.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
Try the latest version 828.
Re: FC 827-64 bit-Splitter bar - Copy and Move icons
I'm running version 827 and the arrows flip depending on which pane is selected. I will update to 828 anyways so I have the latest version.
Who is online
Users browsing this forum: No registered users and 42 guests